How to apply wallpaper around
the window frames
We are introducing a procedure to hang wallpaper around window frames.We recommend cutting the wallpaper into smaller pieces to make it easier to hang.
VIDEO
PHOTOS
PREPARATION
- a. Wallpaper smoother b. Brush
c. Spatula d. Sponge e. Roller f. Cutter
- g. Wallpaper (that is cut into required numbers)
STEP1: Hang wallpaper above and below a window.
Cut the wallpaper.
Cut wallpaper into the size of the areas above and below the windows.
Hang wallpaper above the window.
Hang it above the window.
Smooth out.
Smooth the surface over the seam from right to left, top to bottom to get the air out.
Cut the ends.
Push the wallpaper into the edge between the ceiling and the window frame using a spatula and cut off the top and bottom ends of the wallpaper.
Smooth out with a roller.
Smooth the surface over the seam using a roller.
Wipe off the glue.
Wipe off excess glue from the wallpaper and window frames well using a wet sponge.
Repeat the same process.
Repeat the same process on the area below the window.
STEP2: Cut the wallpaper into smaller pieces.
Measure the size of the wallpaper.
We recommend cutting the wallpaper into smaller pieces to simplify the process.
Cut the wallpaper into smaller pieces.
Make sure you leave extra space at each end of the wallpaper so that you can cut off the seam together to finish.
Cut the ends.
Hang the wallpaper onto the smaller area and cut the top and bottom ends of the wallpaper.
STEP3: Hang the wallpaper between windows.
Hang the wallpaper.
irst, make the wallpaper stick lightly to the wall covering the seam with the extra length at the end.
Measure the wall.
Measure the space between the end of the last wallpaper sheet you hung on the wall and the window frame. Measure a few positions to make sure the wallpaper is hung straight.
Smooth out.
Once you decide the position for the right end of the next wallpaper sheet, smooth out the surface from the right end of the wall to the left and then to the top and the bottom.
If you find a joist.
If you find a joist, smooth the surface to the top and make slits to enable it to fit in the edges and corners.
Fit it along the window frame.
Make a slit on the wallpaper sheet to enable it to fit just along the window frame. Repeat the process on all corners of the window.
Cut the ends.
Smooth out the surface using a brush and smoother and finish by cutting the ends.
Cut the seam.
Cut the two sheets of wallpaper on the seam together.
Smooth out with a roller.
Smooth out any air bubbles using a roller.
finished
